Aube-technologies EConnect Wireless Programmable/Non-programmable TA Bedienungsanleitung PDF herunterladen (Seite 21)

21 69-2473EF—01

EConnect™ TA7210

In case of difficulty / Error codes

Heating system does not

respond

• Check circuit breaker and reset if necessary

“Signal Perdu” appears on the

screen

• The thermostat has lost communication with the

wireless network (usually due to power outage).

Otherwise, check circuit breaker and reset if necessary.

When power is restored, the wireless communication

will be restored within a few minutes.

The thermostat displays “LO”

• The indoor temperature is below 0°C (32°F).

The thermostat displays “HI”

• The indoor temperature is above 60°C (140°F).

The thermostat displays “- -”

• The temperature reading is currently unavailable or the

sensor is defective.

ELECTRICAL HAZARD

The servicing or rewiring of any equipment interface module (EIM) linked to this

thermostat must be done by a certiﬁed electrician.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 47 48

Keine Kommentare

Aube-technologies EConnect Wireless Programmable/Non-programmable TA Bedienungsanleitung Seite 21